Classroom Training -PowerInspect Essentials Training Course

Cadline

[product-detail]

The technology that we use to deliver these courses has been specifically designed to ensure that the learning experience is just as effective as if you are in one of our training centres. The same experienced instructors that deliver our classroom courses deliver our virtual ones too. We limit the number of attendees to eight so that each one receives the right amount of individual support and attention. We are even able to observe how each attendee is progressing with the exercises we set them and steer them in the right direction when they need our help.

What do you get?
 

  • An instructor led training course, delivered across the web, packed with interactive demonstrations, hands-on exercises and plenty of time to ask questions.
  • 3 months post course technical support.

You just need an internet connection and a web browser to connect to our online classrooms. Our remote learning environment is all set up and ready to go. 

This course is designed to take you through a complete inspection workflow inside of PowerInspect. Anyone can attend from start-ups with limited metrology experience right through to established companies looking to push forward their technical capabilities within their inspection department. It is a metrology solution for inspection, verification, measuring and reporting.

[product-detail-end]

][product-agenda]


    This course is designed to take you through a complete inspection workflow inside of PowerInspect. Anyone can attend from start-ups with limited metrology experience right through to established companies looking to push forward their technical capabilities within their inspection department. It is a metrology solution for inspection, verification, measuring and reporting.

    Quick Overview:

    • Importing CAD file
    • GUI
    • Measure simple alignment
    • Perform simple geometric inspection
    • Perform simple form inspection
    • Perform simple dimensions
    • Perform simple report

    The Machine:

    • Connect a cmm
    • Probes & calibration
    • Track & check

    GUI:

    • Ribbon find the functions
    • The tabs
    • Using the mouse
    • Be aware of execute state

    Import and organising CAD data:

    • Drag & drop or Add CAD dialog
    • What is DDZ
    • Edit CAD details
    • Transform - move/rotate/scale
    • Using levels and user levels
    • Summary or detailed view

    Working with inspection geometry:

    • Geometric groups
    • Using the wireframe checker
    • Planes/Lines/Points/Circles
    • Advanced geometric features

    Creating alignments:

    • PLP alignment
    • Dynamic points & free form alignment
    • RPS alignment

    Multi-Measure:

    • Auto tracking
    • Extract nominals
    • Detect item type

    Form inspection:

    • Surface inspection
    • Edge inspection
    • Section inspection

    Advanced alignments:

    • Best fit from points alignment
    • Best fit alignment update
    • User defined alignment and alignment from file
    • Offset alignment
    • Datums
    • Alignment delta transform

    Report:

    • Dimensions
    • Labels
    • CAD View Images
    • Notes
    • Create a report
    • Multiple parts

    Other:

    • Device repositioning wizard
    • Mirror Wizard
    • Transform Nominals
    • Export CAD
    • Preparing for Support

      Autodesk PowerInspect Essentials Training Course pdf

      [product-agenda-end]

      [product-locations]

       

      Training Centre locations:

      Virtual[product-locations-end]

      [alumnis-section][alumni]

      A very enjoyable course taught by a very knowledgeable instructor.

      A very enjoyable course taught by a very knowledgeable instructor. Learned a lot and the course was delivered at a good pace for our group.

      Thomson

      [alumni-end][alumni]

      I found your trainer to be very enthusiastic, knowledgeable and above all, an extremely calm and patient person.

      I thought that I would take some time out to drop you a brief line and to thank you for sending such an excellent trainer. I found your trainer to be very enthusiastic, knowledgeable and above all, an extremely calm and patient person.

      Our group from Trillium completed our three day essentials CAD training course with Cadline yesterday.

      I did do some training in CAD when I was at University, but as a straggler then, I did not get the level of support and help I needed from the lecturer who took that course. Consequently, I found that using CAD was very daunting, a stressor and to be avoided at all costs.

      Not now though !!

      Your trainer is an excellent ambassador for Cadline. I would like him to have recognition for his calm, patient manner, his helpfulness and most of all, for giving me the nudge I needed to overcome my CAD fears...

      Well done to you all and thank you once again.

      Russell Bennett - Trillium

      [alumni-end][alumnis-section-end][product-agenda]

      This course is designed to take you through a complete inspection workflow inside of PowerInspect. Anyone can attend from start-ups with limited metrology experience right through to established companies looking to push forward their technical capabilities within their inspection department. It is a metrology solution for inspection, verification, measuring and reporting.

      Quick Overview:

      • Importing CAD file
      • GUI
      • Measure simple alignment
      • Perform simple geometric inspection
      • Perform simple form inspection
      • Perform simple dimensions
      • Perform simple report

      The Machine:

      • Connect a cmm
      • Probes & calibration
      • Track & check

      GUI:

      • Ribbon find the functions
      • The tabs
      • Using the mouse
      • Be aware of execute state

      Import and organising CAD data:

      • Drag & drop or Add CAD dialog
      • What is DDZ
      • Edit CAD details
      • Transform - move/rotate/scale
      • Using levels and user levels
      • Summary or detailed view

      Working with inspection geometry:

      • Geometric groups
      • Using the wireframe checker
      • Planes/Lines/Points/Circles
      • Advanced geometric features

      Creating alignments:

      • PLP alignment
      • Dynamic points & free form alignment
      • RPS alignment

      Multi-Measure:

      • Auto tracking
      • Extract nominals
      • Detect item type

      Form inspection:

      • Surface inspection
      • Edge inspection
      • Section inspection

      Advanced alignments:

      • Best fit from points alignment
      • Best fit alignment update
      • User defined alignment and alignment from file
      • Offset alignment
      • Datums
      • Alignment delta transform

      Report:

      • Dimensions
      • Labels
      • CAD View Images
      • Notes
      • Create a report
      • Multiple parts

      Other:

      • Device repositioning wizard
      • Mirror Wizard
      • Transform Nominals
      • Export CAD
      • Preparing for Support

        Autodesk PowerInspect Essentials Training Course pdf

        [product-agenda-end]

        £395.00

        This website uses cookies to ensure you get the best experience on our website. Learn More

        Accept Cookies